After the storm passes
Hurricane and Storm Water Damage in Picayune, MS
Storms bring water in from above through roof breaches and from below through street flooding. The storm response crew sorts the two, opens wet ceilings and walls, pulls insulation and sets drying equipment.
(888) 417-5665Call about storm damage- Wet ceilings opened
- Insulation removed
- Drying equipment set
Right now
First steps for hurricane and storm water damage
- Stay off wet roofs. Check from the ground and take photos instead of climbing.
- Protect the contents. Move furniture and electronics away from drips and wet floors.
- Switch off wet circuits. Turn off breakers for rooms with dripping ceilings or water at outlets.
- Record every wet spot. Photograph ceilings, floors and walls, with dates, before any cleanup begins.
The trade facts behind the work
- Wet ceilings are opened early, since insulation above them keeps feeding water down.
- Rain water and flood water are documented separately because they are handled differently.
- Daily readings decide when equipment stays and when it goes.
Wet insulation and ceilings keep adding weight and water until they come down. (888) 417-5665
How the work runs
How hurricane and storm water damage is handled, step by step
- 1
Find the water
Readings trace wet areas from ceiling to floor.
- 2
Open and remove
Wet drywall and insulation come out.
- 3
Set equipment
Air movers and dehumidifiers go into every affected room.
- 4
Check daily
Daily readings set each next step.
Typical cost
What does hurricane and storm water damage cost in Picayune, LA?
Storm jobs scale with how long water stayed in the structure. One leak area with a wet ceiling sits in the first range, several opened rooms in the second, and a large breach that went unnoticed for a long stretch reaches the third.
Single leak area
$2,000 to $4,500
- Ceiling drywall cut out
- Attic insulation removed
- Equipment set up
Multiple rooms wet
$4,500 to $9,000
- Walls and ceilings opened
- Cavities dried
- Readings every day
Big breach, long exposure
$9,000 to $18,000+
- Attic and many rooms
- Floors lifted
- Containment and extended drying
These are typical ranges, not a quote. The category of water, the square footage, the material class and how fast drying started move the number most. Try the water damage cost calculator for a planning figure.
Storm water damage rarely has a single source. Rain pushes in through damaged roofing and around openings, while heavy runoff can come in at the doors. The response team finds every wet area before deciding what has to be opened.
A storm history worth planning around
Hurricane Katrina struck on August 29, 2005 and caused extensive damage in Picayune, though less than in nearby cities. Hurricane Isaac brought heavy rain and strong winds in late August 2012. On June 18, 2026, the remnants of Tropical Storm Arthur left multiple streets with about a foot of water after 6 to 10 inches of rain.
- Rain driven sideways finds gaps at flashing and vents
- Wet attic insulation lets ceilings below absorb water
- Street water at thresholds soaks flooring first
Sorting rain damage from flood damage
Water that fell from the sky and came through the roof is often treated differently from water that rose from the ground. Rain water can be dried in place when caught early, but flood water is removed as contaminated, and the crew documents which is which.
- Roof and attic water: ceilings and insulation
- Ground level water: flooring, cabinets and wall bottoms
Storm response in local homes
Wet ceilings and attic insulation come out first, because they are heaviest and fail soonest. After that, wall cavities are opened where readings stay high, and air movers and dehumidifiers run with daily checks. Each source has its own approach under roof leak water damage and flood water cleanup.
Emergency declarations and records
FOX 8 reported a state of emergency declaration after the June 16, 2026 flooding, and a federal major disaster declaration for Tropical Storm Arthur, DR-4930, had been approved as of August 4, 2026. Dated photos and daily moisture readings give homeowners a clear record of the damage.
Service area
Hurricane and Storm Water Damage across Picayune and nearby
Storm response covers Picayune homes in the Woods Subdivision, the Simmons Subdivision and the Ridge Crest Subdivision, along with the blocks around Goodyear Boulevard and any other address where roof or street water got in.
The same service nearby: hurricane and storm water damage in Slidell, Diamondhead, Waveland.
See every town coveredRelated
Related water damage services
Questions
Hurricane and Storm Water Damage questions, answered
Is storm water always flood water?
No. Rain that comes through a roof is different from water that rises across the ground. The first can often be dried in place, while the second is treated as contaminated.
Should the roof be fixed before drying starts?
Stopping new water entering comes first, since drying cannot finish while rain keeps coming in. Wet materials can be removed and equipment set up once the opening is covered.
What did Tropical Storm Arthur do locally?
The National Weather Service reported multiple streets with about a foot of water on June 18, 2026 after 6 to 10 inches of rain, during the remnants of the storm.
How do storm photos help later?
Dated photos of ceilings, floors and the damaged roof area show how the damage looked before cleanup. They can support insurance or disaster declaration paperwork.
Do wet attic materials always get removed?
Soaked insulation is usually removed because it holds water against the ceiling below. Dry insulation above the wet area can often stay.
How long does storm drying take?
Time varies with how wet the structure is. Daily moisture readings, not a calendar, decide when equipment comes out.
Does a state of emergency change the work?
The cleanup steps are the same. FOX 8 reported the declaration after the June 16, 2026 flooding, and the response team keeps the same records either way.
24/7 water damage dispatch
Get the storm water out of the structure
The response team opens wet ceilings and walls, removes soaked materials and runs drying equipment with daily readings until the framing tests dry.